John Deere S140 48-Inch 22 HP V-Twin Gas Lawn Tractor with Hydrostatic Transmission

Product Description

The John Deere S140 Lawn Tractor combines strong V-twin engine performance, a wide cutting deck and easy-to-use hydrostatic controls for maintaining medium to large residential lawns. Its 22 HP, 724cc V-twin gasoline engine provides the power and torque required for regular mowing, mulching and grass collection while operating more smoothly than a single-cylinder engine.

The engine features overhead valves, electronic ignition, cast-iron cylinder liners and a full-pressure lubrication system with a replaceable oil filter. These components help support reliable starting, efficient operation and longer engine life. A no-tools oil-drain system also simplifies routine oil servicing.

Its 48-inch Edge™ cutting deck uses a three-blade cutting system to cover a broad area with each pass. The deep deck design helps lift grass before cutting, producing a clean and even finish. The smooth underside supports consistent clipping discharge and reduces areas where grass can collect.

The deck is manufactured from heavy-duty 12-gauge steel and protected by dual-stage E-coat and powder-coated finishes. Rolled deck edges provide additional reinforcement, while four deck wheels help the mower follow rolling or uneven terrain without scalping the lawn.

A TLT200 hydrostatic transmission provides continuously adjustable forward and reverse travel without manually shifting gears. Side-by-side foot pedals allow the operator to control direction and speed while keeping both hands on the steering wheel. The tractor can travel forward at speeds of up to approximately 5.5 mph and in reverse at up to 3.2 mph.

The S140 includes a spring-assisted deck-lift lever with 13 cutting positions ranging from 1 to 4 inches. Height adjustments are available in precise 0.25-inch increments, making it easier to select the preferred cutting height for different grass types and seasonal conditions.

Operator comfort is supported by a 15-inch cut-and-sewn open-back seat, wide footrests, anti-vibration floor mats and a large three-spoke steering wheel. The seat provides 5.5 inches of fore-and-aft adjustment across ten positions, helping accommodate operators of different heights.

Bright LED headlights improve visibility in shaded or low-light areas. A mechanical fuel gauge can be viewed from the operator’s seat, while an hour meter helps track operating time and maintenance intervals.

Key Features

• Powerful 22 HP, 724cc V-twin gasoline engine
• Electronic ignition for dependable starting
• Full-pressure engine lubrication with replaceable oil filter
• Cast-iron cylinder liners for increased durability
• No-tools engine oil-drain system
• Wide 48-inch John Deere Edge™ mower deck
• Three-blade cutting system
• Heavy-duty 12-gauge stamped-steel deck
• Side-discharge, mulching and bagging capability
• Electric PTO blade-engagement system
• Hydrostatic transmission with side-by-side pedals
• Forward speed of up to approximately 5.5 mph
• 13 adjustable cutting-height positions
• Cutting range from 1 to 4 inches
• Four anti-scalp mower wheels
• 18-inch turning radius
• Full-length welded-steel frame
• Solid cast-iron front axle
• 15-inch adjustable cut-and-sewn seat
• Bright LED headlights
• Mechanical fuel gauge visible from the seat
• Included front bumper
• Two-year or 120-hour bumper-to-bumper warranty

Technical Specifications

22 HP V-Twin Engine

The 724cc V-twin engine provides the torque needed to operate the 48-inch deck through routine residential mowing conditions. Its twin-cylinder arrangement supports smoother operation, reduced vibration and improved sound quality compared with a single-cylinder engine.

Cast-iron cylinder liners increase resistance to wear, while the full-pressure lubrication system circulates filtered oil through critical engine components. The system is particularly beneficial when mowing on inclines because it maintains more consistent lubrication than a basic splash-lubricated engine.

48-Inch Edge™ Cutting Deck

The 48-inch Edge™ deck uses three cutting blades and a deep shell design to lift grass before cutting. This helps deliver a cleaner finish while improving the movement of clippings through the deck.

The 12-gauge steel shell features reinforced rolled edges and corrosion-resistant coatings. Four deck wheels help maintain the selected cutting height over uneven areas and reduce the chance of lawn scalping.

The standard three-in-one blades support:

• Side-discharge mowing
• Mulching with an optional mulch cover
• Grass collection with an optional rear bagger

A mower wash port and hose connector are included to make cleaning the underside of the deck more convenient.

Hydrostatic Pedal Transmission

The TLT200 hydrostatic transmission eliminates the need to select fixed gears. Travel speed changes according to pressure applied to the forward or reverse pedal.

This setup allows the operator to:

• Slow down when approaching obstacles
• Increase speed across open areas
• Change direction without manually shifting
• Keep both hands on the steering wheel
• Select precise travel speeds for different mowing conditions

Adjustable Cutting Height

A spring-assisted hand lever raises and lowers the cutting deck. The system offers 13 cutting positions from 1 to 4 inches in 0.25-inch increments.

This broad adjustment range makes the S140 suitable for maintaining different grass varieties and adapting to seasonal growth, dry weather or taller mowing preferences.

Operator Comfort

The S140 includes a 15-inch high open-back seat with automotive-style cut-and-sewn construction. The seat can be adjusted while the operator remains seated and offers ten positions across 5.5 inches of travel.

Additional comfort features include:

• Two seat-support springs
• Wide step-through operator platform
• Anti-vibration floor mats
• Large three-spoke steering wheel
• Cup holder
• Covered storage compartment
• Easy-to-read dashboard controls

Durable Frame and Axle

The tractor uses a robotically welded, full-length frame made from 12-gauge steel. High-strength frame rails support the engine, transmission and mower deck during regular residential use.

A solid cast-iron front axle helps withstand repeated turning and movement over uneven ground. The molded hood cannot rust or dent and is designed to resist fading from ultraviolet light.

Recommended Applications

The John Deere S140 is suitable for:

• Medium and large residential lawns
• Open areas requiring a wider cutting deck
• Properties with trees and landscaping features
• Routine mowing, mulching and grass collection
• Light towing with approved lawn attachments
• Homeowners upgrading from a walk-behind mower
• Users who prefer pedal-controlled hydrostatic operation

What’s Included

• John Deere S140 lawn tractor
• 22 HP V-twin gasoline engine
• 48-inch Edge™ three-blade mower deck
• Hydrostatic transmission
• Electric PTO blade-engagement system
• Side-discharge chute
• Four mower deck wheels
• Front bumper
• LED headlights
• Starter battery
• Ignition key
• Mower-deck wash-port connector
• Operator’s manual
• Standard manufacturer assembly components

The mulch cover, rear grass bagger, snow equipment, tow-behind tools and other attachments are sold separately unless specifically included by the retailer.

Compatible Optional Attachments

• 6.5-bushel dual rear bagger
• Mulching cover
• Lawn-striping kit
• Tow-behind utility cart
• Lawn aerator
• Broadcast spreader
• Tow-behind sprayer
• Front blade
• 44-inch two-stage snow blower
• Weather enclosure
• Sun canopy
• Rear weight bracket

Product Dimensions